• xfilter 500

    The Universal Stereo Equalizer

    xfilter 500 | 4 band stereo equalizer with stereo link

xfilter 500

4-Band Analog Stereo Equalizer Module

The Missing Link

The xfilter 500 is a true linked stereo EQ in the 500 series format. It gives you the expensive sound of an all class-A equalizer in a surprisingly affordable package, with a precise stereo image based on computer-selected, stepped potentiometers and low tolerance film capacitors.

With its exceptionally open sound, straight transient projection and solid punch, the xfilter 500 is the perfect match for your xpressor 500 – or any other piece of outboard gear!

5 reasons why you should use the xfilter 500

even there are many more!

  • Build Quality

    The xfilter, just like all our products, is designed, engineered and handcrafted in Germany.

  • Class-A Topology

    Consequently represents the art of discrete signal processing.

  • True Stereo Link

    As one of the few exceptions in the market, the xfilter 500 processes both of its channels with just one set of controllers – a true stereo linked EQ.

  • Computer-Selected Potentiometers

    Every single dual and quad layer pot we buy is measured with custom computer routines, and only the lowest tolerance ones go into production.

  • Low Tolerance Capacitors

    The special series of film caps used for the xfilter performs twice as good as the industry standard in terms of component tolerance.

Play
Play
previous arrow
next arrow
Slider

watch more videos!

Build Quality

The xfilter 500 is all about details.

Every single of its many aspects – sound, features, circuitry, components, design, materials, manufacturing – has been thought over and over until there was just nothing left to improve. Basically, every single part of  our fine products is custom, and most of these are made according to our own designs and specs.

Only the best components the market has to offer are good enough for the xfilter 500, and it shows. Each of our product is manually built to order and tested by ourselves, here at our headquarters in Germany.

Our product benefits sum up in an audio quality that is beyond all doubt. Even when extreme settings are used, the sound always stays clean and powerful.

Active Meets Passive

The xfilter 500 is absolutely serious about flexibility. It offers high and low shelf bands which can be switched into high and low cut filters with resonance, two mid peak filters with wide and narrow Q, plus additional passive LC stages with shielded coils for a glorious top end.

True Stereo Operation

Using an analog EQ on a stereo buss can be quite tricky, as only very few units offer the possibility to link their two mono channels for true stereo processing.

As a result, the user needs to fiddle around with many knobs in order to cope with the tedious task of matching the settings for both channels as good as possible. The problem gets only worse when the controllers do not have any steps for reference.

But while there are so many compressors in the market that can be linked for stereo operation, why are there almost no EQs which can do this, too? One of the main answers is component tolerances. Obviously, you want the two linked channels to behave exactly the same, but the natural tolerances that especially potentiometers and capacitors have counteract this ideal characteristic.

To make a long story short: The xfilter 500 solves this problem by using computer-selected dual and quad layer pots as well as special low tolerance caps.

Resonance High and Low Pass Filter

The outer bands of the xfilter 500 show a great amount of flexibility. In their standard mode, they are set up as sweet sounding high and low shelf filters that can be used to tailor the airiness and fundamentals of your tracks fast and efficiently.

As a special feature, you can independently switch these to become high and low cut filters with 12 dB per octave and an additional resonance peak at the knee frequency. This allows some very interesting and useful filter curves.

Especially bass frequencies can benefit from a low cut with resonance by obtaining a clean and punchy character. But the resonance can also be used to stretch signals in the bass range, because the resonance filter causes a longer post-oscillation time.

In the high frequency range, you can use the resonance filter to put an accent on a selected frequency without boosting the complete HF spectrum at the same time, which can prevent harshness or an unwanted shift of the overall perception towards the treble.

Switchable Filter Quality

The filter quality of the two parametric mid bands can be switched between two characteristics: Wide (Q 0.5) and narrow (Q 1.0), based on the proportional Q principle.

When designing a parametric filter, you have quite a range to choose from when it comes to the Q factor. After extensive listening, we decided to implement a choice of 0.5 or 1.0 in the xfilter 500, as these parameters always result in what this machine is focused on: Very musical processing.

You will notice that very narrow Q factors are not offered here. These days, most engineers we know of use digital filters for notching narrow ranges to get rid of problematic frequencies anyway. And this is for a good reason, as it works extremely well.

Additional Passive High-Band

Mmm… The incredible magic a passive EQ can add on top of everything. We all love it, we all need it!

Well, here is the good news: In addition to its four flexible active bands, the xfilter 500 features a switchable fixed LC filter for polishing the high frequency range. The filter mainly consists of a capacitor and a coil per channel, but unlike the standard shelving designs, it has a slight resonance peak at 12 kHz and starts to fall of at 17 kHz.

This way, the saturation-like storage effect of the coil focuses on the area around the peak without pushing the complete high frequency spectrum too much. The inductors used in the xfilter 500 have their own shields to reduce outer influences like hum – without these shields, the coils would pretty much act like antennas for all kinds of unwanted noises.

Now you know what the ‘Passive Massage’ is all about: Opening up the top end of your signals by pushing just a single button!

YouTube

By loading the video, you agree to YouTube's privacy policy.
Learn more

Load video

Stepped Controllers

The xfilter 500 features stepped potentiometers for all its parameters throughout. The 41 steps make a precise recall very easy, and they provide a useful range of possible settings at the same time. And you will just love the feel of them, too.

Stepped controllers are something you will usually only find on much more expensive gear, special mastering editions, or in most of the cases – not at all. The xfilter 500 establishes this very handy feature in the regular serial version without any luxury up-charge.

Computer-Selected Potentiometers

In a linked stereo EQ, the potentiometers need a lot of layers. The pots for setting the mixers (gain) have two layers each, while the pots for setting the frequencies even have a total of four layers each!

The problem occurs that every single layer has its own component tolerance, and while layer A could be at the absolute minimum of the allowed tolerance, layer B could be at the absolute maximum. As a result, the filter stages of the left and right channels would not behave the same.

To solve this, every single potentiometer in the xfilter 500 is measured and selected with an Audio Precision rig and computer routines written exactly for this task. As a result, only 65% of the dual layer pots and only 50% of the quad pots we buy go into production – the rest is put aside.

It’s a true custom shop option we are proud to offer with every xfilter 500 free of any up-charges.

Special Low Tolerance Capacitors

If you look under the hood of an audio equalizer, it is very likely that you will find a lesser or greater number of film capacitors. These caps use an insulating plastic film as the dielectric, which is drawn in a special process to an extremely thin thickness.

There are several technical reasons why film caps are a good choice for audio filter circuits, and generations of audio engineers will confirm that they sound great, too.

A typical representative of this component is the MKS film type, which is a great sounding cap to be found in many EQ designs. However, many MKS types come with a typical tolerance of 10%, which can have a negative influence on the channel accuracy of a stereo linked EQ.

For this reason, the xfilter 500 uses a special FKS type film capacitor which sounds just like a good cap should, coming with a maximum tolerance of 5% only. One more step towards a more accurate stereo image.

Ground Layer Shield

The PCBs of the xfilter 500 have a total of four layers: Two of them are used for the audio circuitry, one is for power supplying traces, and the last one is a dedicated ground shield layer. But what’s the idea behind this?

The filter networks of the individual bands of the EQ become higher in resistance the lower their specific frequency is set. This makes them more vulnerable towards hum which is caused by electric fields.

As the additional ground layer is placed extremely close beneath the traces which carry audio, it is very efficient as a shield against unwanted noise interferences.

100% Discrete Class-A Topology

We love the sound of class-A circuitry! And here is why: In a class-A amplifier, the transistors are conductive all of the time, so there is no crossover distortion at all. This is the perfect technological basis for an open sound with massive punch and no degradation of your original source.

The discrete approach makes it possible to design every single stage in signal processing exactly to what you want it to do – physics becomes the only limit. The xfilter 500 uses our custom discrete input and output stages derived from the alpha compressor. The mixing stages are also discrete designs running in class-A mode.

The actual filter stages (band pass etc.) use integrated op-amps instead, and also in this regard we did not go for an off-the-shelf solution. Instead of cheap industrial standard op-amps, the xfilter 500 uses high grade Burr-Brown OPA series amps which have been designed especially for the critical discerns of pristine audio circuitry.

And there it is – the expensive sound of boutique high end EQs in an affordable package.

Technical Data

Frequency response
<10 Hz - 400 kHz (-3.0 dB)THD+N
@ 0 dBu, 20 Hz – 22 kHz: 0.0018 %
@ +10 dBu, 20 Hz – 22 kHz: 0.005 %

Noise floor
20 Hz – 20 kHz (A-weighted): -98 dBu

Dynamic range
20 Hz – 22 kHz: 120 dB

Maximum level
Input: +21 dBu
Output: +21 dBu

Impedance
Input: 10 kOhm
Output: 68 Ohm

Power consumption
Total: 210 mA
Per slot: 105 mA

Warmth and Sparkle

“The xfilter 500 has done what I’ve asked of it on every occasion – make what I run through it sound better. Whether I’m looking for sheen, warmth, bottom, midrange, sparkle… the xfilter has performed dutifully and happily. The Passive Massage really is a treat.”

Eli Crews | Tape Op | Portland

“The xfilter 500 is a fantastic and versatile tool that we would happily give a place to on our stereo mix buss. However, it isn’t limited to this role and performed fantastically on just every sound we put through it. At this price, the xfilter is almost a must have tool for your mix buss.”

Mike Hillier | Music Tech | Bath

xfilter 500 | the 4 band stereo eq from elysia

Smooth Professional

“There is certainly a need for this new tool, and with the ability to find the best in any piece of audio and exploit it, it’s hard to imagine any future competition outdoing what elysia has already done here. A whole rack of these would be a welcome addition to any studio.”

Brandon T. Hickey | Mix Magazine | New York

“The xfilter 500 will behave like a smooth professional and you can trust it to enhance without degrading, and yet it offers a world of radical reshaping that makes it a highly creative tool. I’m having a problem thinking of a reason not to buy one.”

Robbie Stamp | Future Music | Bath

Check our latest Blog Posts

elysia compressors in a rack
elysia 500 Series Rack in the StudioTravis Ball
Ruben Tilgners nvelope development board
Transient Designer Story by Ruben Tilgner
Blog | portable and lightweight analog soundprocessor solution

Sign Up to our Newsletter

From time to time we’ll send newsletters with interesting music, recording and mastering topics.